Izdelki za a kanal prenos v živo (5)

The µCAN.4.ai-F1 is the versatile universal measuring module for analogue standard signals. The module is designed to measure +/- 40 V or -20…+20 mA signals at an overall sampling rate of 4 kHz. Strain gauge full bridge:Voltage +/- 60 mV Supply voltage 4.096 V:Accuracy 0.01 % (FS) Resolution 24-bit (0.01 µV):Sampling rate 1.25 ms / 800 Hz Parameterized via set-up software:Casing powder coated Fieldbus CAN:Protocol Raw CAN

4-channel universal amplifier Scanning rate 20 kHz with 24 bit Supports more than 12 sensor types Ethernet, CAN

Measuring Frequency with PPC-CAN-FR The PPC-CAN-FR can be used to connect frequency signals (e.g. from turbines, flow counters or tachometers) to the PPC-Pad or PPC-04-plus-CAN. The instruments can process sinus and rectangle signals from 1 Hz to 5 KHz with signal amplitude from 20 mV to 10 V. Configuration is possible via USB and PC software. Power Supply for External Sensors An external sensor can be supplied with 24 V using the PPC-CAN-FR. Analogue or CAN Output The PPC-CAN-FR can be connected either to an analogue input or CAN input.

The decentralized module µCAN.4.ao-BOX features four analogue outputs which optionally provide a voltage signal (+/- 10 V) or a current signal (0…20 mA). The CAN interface supports the protocols protocols CANopen and J1939. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

The µCAN.1.ti-BOX is the single channel solution for the acquisition of temperature signals. Resistance sensors as well as thermocouples may be connected to the module. The CAN interface supports the protocol CANopen. Temperature Thermo type J, K, L:Temperature Pt100 (2- / 4-core) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.1 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Fieldbus CAN:Protocol CANopen / Raw CAN